Record all details necessary to identify the sample including width and machine direction in relation to the direction of pull. Record the tensile force and displacement as the seal is peeled apart. Set the tensile tester in motion at a speed of 200 Р’В± 10 mm/min.Р”В¦. If required, support the tail of the test specimen.Р”Тђ. Clamp the ends of the sample strip into the jaws of the tensile tester with the seal perpendicular to the direction of movement, and equidistant between the fixed and moving jaws.Р”В¤. Sterilize the test strips in accordance with the relevant standardsР”Р€. Cut strips from the sample to the dimensions defined in the standard.Р”Сћ. Expose the pouch or reel material to the intended sterilization cycle in accordance with the relevant European standardР”РЋ.

Publisher: British Standards Institution. This may be a vertical testing stand, or alternatively a horizontally oriented machine.Р”В¬ut a sufficient quantity of strips from a representative sample to a width of 15 Р’В± 0.1mm perpendicular to the seal, and of sufficient length so as to able to be easily clamped in the fixed and moving grips of the test stand. DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 1: EXTERNAL RENDERING. Tensile tester with grips and suitable range loadcell. BS EN-15038 European Quality Standard for Translation Service Providers. The seal strength of the pouch or reel material is measured by cutting a sample strip at 90Р’В° through the seal and measuring the maximum force needed to separate the seal.

Bs en 10160 standard